01MA-1 Flight Nylon
Flight nylon over a warm lining, with the sleeve pocket that gives the style away.
- Fit
- Standard in the body, roomy at the armhole
- Closure
- Zip front sitting under a storm flap
- Trim
- Rib collar, cuffs and hem
For outerwear labels, teams and workwear buyers
Custom Bomber Jacket Manufacturer — Branded Outerwear With Full Custom Detailing
Produce custom bomber jackets for fashion collections, brand merchandise and team uniforms. Select shell, lining and ribbing, paired with embroidery, patches and screen printing to craft standout outerwear that reinforces your brand identity.
Up to 12 embroidery thread colours and full-size back-panel printing available. 1,400+ branded bomber projects delivered for global buyers.
OEKO-TEX 100BSCIGRS
Starting points
Six Bomber Builds, Each Cut to Your Own Block
Six ways into one silhouette. What separates them is the shell, the closure and the lining — and all three come off your pack.
01
02Satin Bomber
A satin face on the same block, so the piece reads dressier under print or embroidery.
- Fit
- Tapered slightly at the waist
- Closure
- Centre zip, set on a narrow placket
- Trim
- Elasticated cuffs and a self hem
03Leather Bomber
Hide or a leather-look face, built on a biker or a flight cut and lined for warmth.
- Fit
- Structured at the shoulder, easy below it
- Closure
- Asymmetric zip, or a snap placket
- Trim
- Piped seams with a quilted shoulder panel
04Reversible Bomber
Two faces on one piece — a solid shell outside, a contrast lining that becomes the second look.
- Fit
- Boxy, cut to read the same both ways
- Closure
- Double-sided zip, finished on both faces
- Trim
- Bound edges, with no raw seam inside
05Quilted-Liner Bomber
Insulation quilted into the piece, so it carries its own warmth rather than a separate vest.
- Fit
- Straight, sitting over a sweater
- Closure
- Two-way zip with a chin guard
- Trim
- Quilted body panels on plain sleeves
06Coach's Bomber
Cut longer through the torso for a touchline look, with room for a crest and a name.
- Fit
- Longer through the torso
- Closure
- Snap front over a knit waistband
- Trim
- Contrast stripes on the sleeve
Each build above is one route in · shell, trim and lining are agreed on your tech pack
The bomber spec sheet, as a PDFThe faces
Shell and Cloth
What the outer face has to do before a panel is cut.
Selected face
Flight nylon
gives a light woven face that takes a full-colour print without adding weight.
- Woven flat rather than knitted, so a printed graphic keeps a crisp edge instead of blurring.
- Light enough that the shoulder line stays soft across a full-length body.
- Dyes to a flat solid colour, which lets a printed panel sit beside a plain one without a seam showing.
- Cuts the wind on its own, so a light version still works as an outer layer without a fill.
Selected face
Ripstop nylon
carries a grid weave that stops a tear from running under hard wear.
- Grid squares are woven in at the loom rather than coated on, so they survive a wash.
- Packs down small, which suits a travel or pack-away bomber.
- Takes a stencilled or embroidered crest where a softer cloth would pull at the stitches.
- Finish can be matte or lightly sheened, set by the yarn rather than by a coating.
Selected face
Satin
brings a smooth, low-sheen surface, so a crest or wordmark reads cleanly on it.
- Smooth face holds a fine line, so a small label or a thin rule survives the print.
- Sits inside as a lining, or outside on a piece that is meant to be looked at.
- Colour comes up deep on it, which is why a dark or a jewel shell usually starts here.
- Marks show, so the pattern is cut to keep the front panels off the bench.
Selected face
Cotton and poly-cotton
give a matte body that holds rib trim and takes a heavy stitch.
- Body is dense enough that a knitted rib keeps its shape at the cuff and hem.
- Poly-cotton version holds the handle and the colour through repeated washing.
- Washes and garment finishes land evenly, so the shell can arrive already worn in.
- Stitching stays flat across a seam, which is where a workwear look is decided.
Selected face
Bonded wovens
turn wind at the front, and are quoted by membrane weight.
- A membrane sits between two faces, so the weather layer never shows as a coating.
- Front and sleeves can be bonded while the back stays plain, which is how a two-tone shell is built.
- Quieter and softer than a coated shell, so it drapes rather than standing off the body.
- Chosen early, because the layers decide the panel cut and the seam sealing that follow.
Selected face
Heavy twill and canvas
hold a workwear line and soften as the jacket wears in.
- Stands the shell up on the shoulder, which is what makes a field-cut bomber read as workwear.
- Softens first at the elbows and the collar, and that break-in is the point.
- Bar-tacks, rivets and heavy top-stitching sit flat without puckering the panel.
- Makes a matte ground for a patch, a label or a stencil, and burnishes where it is handled.
Selected face
Leather and coated faces
are priced by thickness and by the finish you want.
- Real hides are graded by the panel each one will yield, so the back is planned around it.
- Coated faces give a similar look on a cloth base, with a more even colour across a run.
- Finish decides the upkeep as much as the look, whether matte, grained or high gloss.
- Sample first here, because grain and colour shift between lots.
Inside the make
How the Bomber Closes, and What Is Built in behind It
Two questions an outerwear order raises, and both are answered before cutting begins.
Construction and trim
How the jacket closes, and where its edges are allowed to end up.
- Ribbed collar, cuffs and hem are knitted to your colour rather than bought in.
- Zips, snaps and storm flaps are fitted on the line, so the hardware matches the sample.
- Every edge is bound or top-stitched, so nothing raw meets the body.
- Pockets are set from your pattern, as flat welt, flap or zipped.
- Bar-tacks land at the pocket mouths and the placket, where a bomber takes its strain.
Lining and fill
The layer most buyers leave until last, and the one a body feels first.
- Quilted satin, taffeta and brushed fleece linings are matched to the shell weight.
- Fill weight and baffle spacing are set from the pack, whether down-alternative or a bonded wadding.
- A removable liner, an inner pocket or a pack-away hood is a pattern request rather than a separate run.
- Mesh backs the body panels wherever the jacket needs to breathe.
- Lining colour is matched to the shell, or spent as the flash of contrast inside.
Approve it on cloth
Shell, Trim and Lining Proved on a Single Garment
Nothing moves into bulk until that garment is signed off. Sampling is quoted on its own, and the prototype is the only piece you commit to.
Made yours
Four Calls That Turn a Bomber into Your Product
The build is common ground. These four choices are what make the run yours rather than a stock shape.
Colour blocking
Panel colours set from your palette, with the rib and lining matched or contrasted.
Mark placement
A club crest, a wordmark or a squad number, embroidered or applied wherever you want it.
Print and embroidery
Screen print, heat transfer or a full-colour graphic, proofed on the cloth first.
Private-label service
Care labels, hang tags and carton marks all carry your brand out with the goods.
All four are agreed before sampling starts · artwork can start from files you already hold
Client runs
Two Runs, Told by the Buyers Who Placed Them
Both arrived with a date attached, and both are reported here in the buyer’s own words.
Streetwear outerwear brand
“A custom block bomber jacket, rather than generic off-the-shelf patterns, was what our collection required — and JaceApparel delivered exactly the envisioned design. A 320-piece order across 4 colourways was produced. The prototype arrived within 8 working days, with minor fit revisions resolved rapidly. This custom silhouette drove a full sell-out of the new outerwear drop in just 6 weeks, alongside a 35% rise in repeat orders. Full ownership of the pattern block stays with our brand, marking the project’s biggest win.”
Lila MendezHead of Product, Terra Street ApparelCorporate events and brand ambassadors
“Custom bomber jackets for 210 team members and brand ambassadors were sourced through JaceApparel. Complete control over shell fabric, rib trim and lining was maintained throughout production. The 100 pcs per colour MOQ aligned perfectly with this limited-run event programme. Every bulk item cleared on-site QC inspection, and shipment arrived 4 days ahead of the agreed timeline. Exceptional feedback on fit came from all event attendees, and JaceApparel has been selected as the official uniform manufacturer for next year’s regional summit.”
Mark HaleProcurement Lead, Nova Corporate EventsQuestions
Frequently Asked Questions About Custom Bomber Jacket Manufacturer
01What is the smallest bomber order you will take?
Ordering opens at 100 pieces per colour, and each colourway is counted on its own — two colours means two minima. Sizes can be mixed inside a single colour to suit the order.
Ask about a first bomber run02How quickly can a bomber sample be ready, and the bulk run after it?
A prototype leaves the sample room inside 7–10 working days once the pack closes, with 3–5 fit revisions included. Once the sealed sample is signed, bulk runs in 7–15 working days. The sample itself is priced at US$80–150 per style. That figure is credited back once a bulk run passes 500 pieces.
Have a sample costed03We have a drawing rather than a tech pack — can you draft the pattern?
Bring a sketch, photographs of a jacket you already own that fits, or a few measurements on paper. The block is developed on site, so nothing has to be finished before pattern work begins.
Walk through a concept04What certifications does the mill hold?
The mill’s certifications appear in the trust row above. The paperwork behind them comes out with the quote, matched to whatever compliance form your market uses, rather than sitting here as a badge.
See the records05Is a finished bomber run checked before it leaves?
The final check on a bomber order runs to AQL 2.5, so quality is a counted rate rather than a personal opinion.
Ask what the final check covers06How does a bomber order get shipped?
Freight is quoted under DDP, DAP or DPU to suit the destination, and carriage sits on its own line rather than being folded into the piece price.
Have freight quoted07What is covered under private-label service?
Paperwork and packaging sit around a bomber order — care text, carton marks and your own reference on the file, all set to the market you sell in. The whole scope is on the private-label page.
Open the private-label page08Can one order cover bombers and the rest of the jacket range?
A bomber can share a tech pack and a colourway with varsity, puffer and softshell pieces, because all of them are graded from one chart. That is how the jacket line usually goes out — the bomber sitting inside a wider order.
See the full jacket rangeNext step
A Shell Choice and a Size Chart Open the Quote
Tell us the shell and the size chart you work from. The reply breaks out cloth, making and trim as separate lines, each one costed before a panel is touched.
Or email usinfo@jaceapparel.com